Search
Now showing items 11-18 of 18
An updated experimental and kinetic modeling study of n-heptane oxidation
(Elsevier ScienceDirect, 2016-07-25)
This work presents an updated experimental and kinetic modeling study of n-heptane oxidation. In the experiments, ignition delay times of stoichiometric n-heptaneiair mixtures have been measured in two different high-pressure ...
Experimental and kinetic modeling study of the shock tube ignition of a large oxygenated fuel: tri-propylene glycol mono-methyl ether
(Elsevier, 2015-05-13)
Tri-propylene glycol monomethyl ether (TPGME) is an important oxygenated fuel additive that can be used to reduce soot in diesel engines. However, a validated chemical kinetic model that incorporates the low- to high-temperature ...
An experimental and kinetic modeling study of n-hexane oxidation
(Elsevier, 2015-09-11)
Ignition delay times for n-hexane oxidation have been measured in a rapid compression machine (RCM) at stoichiometric conditions and at 15 bar. Due to the high reactivity of n-hexane and non-ideal experimental effects ...
An ignition delay time and chemical kinetic modeling study of the pentane isomers
(Elsevier, 2016-10-26)
Ignition delay times of n-pentane, iso-pentane, and neo-pentane mixtures were measured in two shock tubes and in a rapid compression machine. The experimental data were used as validation targets for the model described ...
Using rapid compression machines for chemical kinetics studies
(Elsevier, 2014-04-26)
Rapid compression machines (RCMs) are used to simulate a single compression stroke of an internal combustion engine without some of the complicated swirl bowl geometry, cycle-to-cycle variation, residual gas, and other ...
Theoretical study of the rate constants for the hydrogen atom abstraction reactions of esters with •OH radicals
(American Chemical Society, 2014-05-30)
A systematic investigation of the rate constants for hydrogen atom abstraction reactions by hydroxyl radicals on esters has been performed. The geometry optimizations and frequency calculations were obtained using the ...
An experimental and modeling study of the ignition of dimethyl carbonate in shock tubes and rapid compression machine
(Elsevier, 2017-11-05)
Ignition delay times of dimethyl carbonate DMC were measured using low- and high-pressure shock tubes and in a rapid compression machine (RCM). In this way, the effect of fuel concentration (0.75% and 1.75%), pressure (2.0, ...
A comprehensive experimental and kinetic modeling study of 1-hexene
(Elsevier, 2021-06-13)
It is important to understand the low-temperature chemistry of 1-hexene as it is used as a representative alkene component in gasoline surrogate fuels. Ignition delay times (IDTs) of 1-hexene measured in rapid compression ...