Search
Now showing items 1-8 of 8
A comprehensive experimental and modeling study of the ignition delay time characteristics of ternary and quaternary blends of methane, ethane, ethylene, and propane over a wide range of temperature, pressure, equivalence ratio, and dilution
(Elsevier, 2021-08-09)
The ignition delay time (IDT) characteristics of new ternary and quaternary blended C 1 ¿C 3 gaseous hy- drocarbons, including methane/ethane/ethylene and methane/ethane/ethylene/propane, are studied over a wide range of ...
A comparative reactivity study of 1-alkene fuels from ethylene to 1-heptene
(Elsevier, 2020-09-23)
A comparative reactivity study of 1-alkene fuels from ethylene to 1-heptene has been performed using ignition delay time (IDT) measurements from both a high-pressure shock tube and a rapid compression machine, at an ...
Ignition delay time measurements of diesel and gasoline blends
(Elsevier, 2020-09-23)
Blends of diesel and gasoline can be used to achieve certain desired ignition characteristics in advanced compression ignition engine concepts. In this work, ignition delay times were measured for two blends of diesel and ...
An experimental and kinetic modeling study of the ignition delay characteristics of binary blends of ethane/propane and ethylene/propane in multiple shock tubes and rapid compression machines over a wide range of temperature, pressure, equivalence ratio, and dilution
(Elsevier, 2021-03-02)
In this work, the ignition delay time characteristics of C2 – C3 binary blends of gaseous hydrocarbons including ethylene/propane and ethane/propane are studied over a wide range of temperatures (750 – 2000 K), pressures ...
Understanding the antagonistic effect of methanol as a component in surrogate fuel models: A case study of methanol/n-heptane mixtures
(Elsevier, 2021-01-19)
Methanol is a widely used engine fuel, blend component, and additive. However, no systematic auto-ignition data or laminar flame speed measurements are available for kinetic studies of the effect of methanol as a blending ...
A comprehensive experimental and kinetic modeling study of 1-hexene
(Elsevier, 2021-06-13)
It is important to understand the low-temperature chemistry of 1-hexene as it is used as a representative alkene component in gasoline surrogate fuels. Ignition delay times (IDTs) of 1-hexene measured in rapid compression ...
A comprehensive experimental and improved kinetic modeling study on the pyrolysis and oxidation of propyne
(Elsevier, 2020-09-15)
To improve our understanding of the combustion characteristics of propyne, new experimental data for ignition delay times (IDTs), pyrolysis speciation profiles and flame speed measurements are presented in this study. IDTs ...
An experimental and kinetic modeling study of the auto-ignition of natural gas blends containing C1–C7 alkanes
(Elsevier, 2020-07-16)
Ignition delay time measurements for multi-component natural gas mixtures were carried out using a rapid compression machine at conditions relevant to gas turbine operation, at equivalence ratios of 0.5–2.0 in ‘air’ in the ...