Search
Now showing items 1-5 of 5
An experimental and modeling study of shock tube and rapid compression machine ignition of n-butylbenzene/air mixtures
(Elsevier, 2013-08-28)
In our previous work (D. Darcy, C.J. Tobin, K. Yasunaga, J.M. Simmie, J. Wurmel, W.K. Metcalfe, T. Niass, S.S. Ahmed, C.K. Westbrook, H.J. Curran, Combust. Flame 159 (2012) 2219-2232), ignition delay times of n-butylbenzene ...
Towards a kinetic understanding of the NOx promoting-effect on ignition of coalbed methane: A case study of methane/nitrogen dioxide mixtures
(Elsevier, 2016-05-03)
Nitrogen dioxide (NO2) is an important impurity in coal-bed methane (CBM) and a dominant component of NOx pollution in practical engines. Its promoting effect on methane ignition has been studied in the current experimental ...
Autoignition of ethanol in a rapid compression machine
(Elsevier, 2013-12-09)
Ethanol is a renewable source of energy and significant attention has been directed to the development of a validated chemical kinetic mechanism for this fuel. The experimental data for the autoignition of ethanol in the ...
A detailed chemical kinetic modeling, ignition delay time and jet-stirred reactor study of methanol oxidation
(Elsevier, 2016-01-29)
A shock tube (ST) and a rapid compression machine (RCM) have been used to measure new ignition delay times for methanol oxidation over a wide range of pressures (2-50 atm) and equivalence ratios (0.5, 1.0, and 2.0). These ...
An experimental and kinetic modeling study of n-hexane oxidation
(Elsevier, 2015-09-11)
Ignition delay times for n-hexane oxidation have been measured in a rapid compression machine (RCM) at stoichiometric conditions and at 15 bar. Due to the high reactivity of n-hexane and non-ideal experimental effects ...