Browsing College of Engineering and Informatics by Title
Now showing items 211-230 of 1158
-
Defining corporate energy policy and strategy to achieve carbon emissions reduction in non-energy intensive multi-site industrial organisations
(University of Maribor Press, 2017-07-05)Research on the components and characteristics of long-term energy policy and strategies in large organisations is limited. Non-energy intensive multinationals do not face the environmental regulations required by their ... -
Defining corporate energy policy and strategy to achieve carbon Emissions reduction Targets via energy MANAGEMENT in non-energy intensive multi-site manufacturing organisations
(Elsevier, 2018-03-14)Research on the characteristics of long-term energy policy and associated strategies in multisite manufacturing organisations is limited. Non-energy intensive multinationals do not face the environmental regulations ... -
Deformation mechanisms of selective laser melted 316L austenitic stainless steel in high temperature low cycle fatigue
(Elsevier, 2022-04-22)To investigate the low cycle fatigue (LCF) properties of SLM (Selective laser melting) 316L at 550 °C high temperature, a series of LCF tests at different strain amplitudes is conducted on SLM 316L and traditional 316L. ... -
Demand side detailed models
(INDIGO consortium, 2017-08-02)INDIGO is a Horizon 2020 EU-funded project carried out by 6 partners from across Europe and 1 from the United Arab Emirates that aims to develop a more efficient, intelligent and economical generation of District Cooling ... -
Denitrification of a nitrate-rich wastewater using various wood-based media materials
(2006)This laboratory study examined the use of various wood materials as a carbon source in horizontal flow filters to denitrify nitrate-nitrogen (NO3-N) from a synthetic wastewater. The filter materials were: sawdust ( Pinus ... -
Densified wood dowel reinforcement of timber perpendicular to the grain: a pilot study
(Taylor & Francis, 2021-06-07)An investigation was carried out to examine the potential to utilise densified wood dowels as a reinforcement for timber subjected to compression loading perpendicular to the grain. While timber has a high strength-to-weight ... -
Design and implementation of a performance assessment methodology cognisant of data accuracy for Irish wastewater treatment plants
(Elsevier, 2017-07-12)Without intervention, wastewater treatment plants will become more resource intensive as they strive to meet environmental regulations. This challenge is set against the backdrop, in many countries, of an emphasis on cost ... -
Design and manufacturing of customised maxillofacial prostheses.
(Elsevier, 2003-04-28)Customised implants created by Computer-Assisted Surgery (CAS) techniques and used in maxillofacial reconstruction indicate improved outcomes over conventional techniques. ‘‘Non-functional’’ multistaged procedures are ... -
Design concepts for building products optimised for deconstruction
(National University of Ireland Galway, 2022-02)The Innovative Design for the Future Use and Reuse of Wooden building components (InFutUReWood) project aims to answer two main questions: ¿ How easy is it to reuse timber from the current building stock, especially as ... -
A design for environment (DFE) product analysis
(2007)Environmental legislation is holding electrical and electronic manufacturers accountable for the disposal of their products at end of life. In order to reduce disposal costs, manufacturers are seeking to optimise product ... -
Design for experience: An analysis of the Irish Creative Industry
(2012)In this paper we report on the results of an exploratory study that investigated the experiences of key informants from SMEs in the Irish creative sector that are involved in design. A purposive sample of 56 small firms ... -
Design for Lean Six Sigma Application in a family run multi-generational micro enterprise – A case study
(Springer, Cham, 2023-02-12)Existing research emphasises limited success rates for Lean implementation in Small and Medium Sized Organisations. The objective of this research was to test and validate the applicability of Design for Lean Six Sigma ... -
Design of composite tidal turbine blades
(2013-02-24)Tidal turbine blades are subjected to significant thrust and torsional loadings due to the high density ofthe seawater in which they operate. These thrust loadings lead to high bending moments at the bladeroot, which can ... -
Designing environmentally efficient aquafeeds through the use of multicriteria decision support tools
(Elsevier, 2021-05-21)Aquaculture is the fastest growing food production system, and the sector accounts for more than half of all fish consumed. Its potential as a sustainable food source has been recognised within the EU Farm to Fork strategy ... -
Designing online delivery of lean education during COVID-19
(Emerald, 2023-08-23)This study describes how two organisations transitioned to teaching Lean online during and post Covid-19. The study aims to establish how Lean teaching and training can be designed and delivered effectively online without ... -
A detailed investigation of the impact of an innovative dynamic façade system on indoor environmental quality in offices
(University of Galway, 2023-10-04)In recent years, naturally ventilated glass façades have become a common feature in the design and retrofit of large-scale non-residential buildings, integrating architectural aesthetics and energy efficiency. These ... -
Detecting the end of nitrification in small and decentralized wastewater treatment systems using low-resource real-time control methods
(American Society of Civil Engineers, 2018-06-12)There is increasing demand on operators of small-scale wastewater treatment plants (WWTPs) to improve biological nutrient removal and energy efficiency while being subject to unique challenges, including reduced resources. ... -
Detection and repair of flash-eye in handheld devices
(IEEE, 2014)Red-eye and flash-eye defects in still photography continue to cause problems for digital imaging devices. New variants of flash-eye defects have appeared as cameras and cameras sub-systems get smaller in size. This paper ... -
Determinants of Foreign Direct Investment: An analysis of Japanese Investment in Ireland using the Kano model
(IEEE, 2013-06)This paper presents findings from an analysis of the location-specific foreign direct investment (FDI) factors that attract Japanese multinational companies (MNCs) to Ireland. Data was collected from 11 Japanese MNCs and ... -
Determination of flushing characteristics of the Irish Sea: A spatial approach
(Elsevier ScienceDirect, 2011-12-08)The Authors devised a novel generic approach to assessing the flushing of the Irish Sea through the determination of spatially distributed residence times and the development of flushing homogeneity curves. Results indicate ...