Now showing items 84-103 of 474

  • Cyclic thermo-mechanical material modelling and testing of 316 stainless steel 

    Leen, Sean B. (Elsevier ScienceDirect, 2010-04-20)
    A programme of cyclic mechanical testing of a 316 stainless steel, at temperatures of up to 600 C under isothermal conditions, for the identification of material constitutive constants, has been carried out using a ...
  • Cyclic viscoplasticity testing and modelling of a service-aged P91 steel 

    Farragher, Tadhg P.; Leen, Sean B. (American Society of Mechanical Engineers, 2014-04-16)
    A service-aged P91 steel was used to perform an experimental program of cyclic mechanical testing in the temperature range of 400 °C–600 °C, under isothermal conditions, using both saw-tooth and dwell (inclusion of a ...
  • Cyclonic circulation in the western Irish Sea in future climate 

    Olbert, Agnieszka Indiana; Hartnett, Michael; Dabrowski, Tomasz (International Association for Hydro-Environment Engineering and Research, 2011-07-01)
    The Irish Sea (IS) is a semi-enclosed body of water on the European Continental Shelf and the Western Irish Sea Gyre (WISG) is a characteristic phenomenon of the Sea. The gyre due to its significant effects on the circulation, ...
  • Damage and permeability in tape-laid theromplastic composite cryogenic tanks. 

    Grogan, David M.; Ó Brádaigh, Conchúr M.; McGarry, J. P.; Leen, Sean B. (2015-09-07)
  • Damage characterisation of cryogenically cycled carbon fibre/PEEK laminates 

    Grogan, David M.; Leen, Sean B.; Ó Brádaigh, Conchúr M. (Elsevier ScienceDirect, 2014-08-14)
    A unique insight into damage formation in CF/PEEK laminates before, during and after cryogenic cycling, using optical microscopy and 3D X-ray computed tomography (CT), is presented. Thicker laminates were found to exhibit ...
  • A Data-Driven Exploration of Factors Affecting Student Performance in a Third-Level Institution 

    Madden, Michael G.; Lyons, William; Kavanagh, Ita (2008)
    This paper describes an application of data mining techniques to the analysis of student academic records, collected at Limerick Institute of Technology, with the goal of acquiring clearer, evidence-based ...
  • Denitrification of a nitrate-rich wastewater using various wood-based media materials 

    Rodgers, Michael; Mulqueen, John; Healy, Mark (2006)
    This laboratory study examined the use of various wood materials as a carbon source in horizontal flow filters to denitrify nitrate-nitrogen (NO3-N) from a synthetic wastewater. The filter materials were: sawdust ( Pinus ...
  • A design for environment (DFE) product analysis 

    Cormican, Kathryn; Dobbs, Jacqueline (2007)
    Environmental legislation is holding electrical and electronic manufacturers accountable for the disposal of their products at end of life. In order to reduce disposal costs, manufacturers are seeking to optimise product ...
  • Design for experience: An analysis of the Irish Creative Industry 

    Cormican, Kathryn (2012)
    In this paper we report on the results of an exploratory study that investigated the experiences of key informants from SMEs in the Irish creative sector that are involved in design. A purposive sample of 56 small firms ...
  • Design of composite tidal turbine blades 

    Grogan, David M.; Leen, Sean B.; Kennedy, Ciaran; Ó Brádaigh, Conchúr M. (2013-02-24)
    Tidal turbine blades are subjected to significant thrust and torsional loadings due to the high density ofthe seawater in which they operate. These thrust loadings lead to high bending moments at the bladeroot, which can ...
  • Detection and repair of flash-eye in handheld devices 

    Corcoran, Peter; Bigioi, Petronel; Nanu, Florin (IEEE, 2014)
    Red-eye and flash-eye defects in still photography continue to cause problems for digital imaging devices. New variants of flash-eye defects have appeared as cameras and cameras sub-systems get smaller in size. This paper ...
  • Determinants of Foreign Direct Investment: An analysis of Japanese Investment in Ireland using the Kano model 

    Cormican, Kathryn (IEEE, 2013-06)
    This paper presents findings from an analysis of the location-specific foreign direct investment (FDI) factors that attract Japanese multinational companies (MNCs) to Ireland. Data was collected from 11 Japanese MNCs and ...
  • Determination of flushing characteristics of the Irish Sea: A spatial approach 

    Dabrowski, Tomasz; Hartnett, Michael T.; Olbert, Agnieszka Indiana (Elsevier ScienceDirect, 2011-12-08)
    The Authors devised a novel generic approach to assessing the flushing of the Irish Sea through the determination of spatially distributed residence times and the development of flushing homogeneity curves. Results indicate ...
  • Determining Unique Fingerprint Features for Biometric Encoding of Data 

    Cucu, Catalin; Cucos, Alex; Corcoran, Peter M. (IEEE, 2008-01-09)
    A novel approach to determining unique fingerprint features with high repeatability is described. The techniques described are particularly suitable for CE applications and devices employing inexpensive capacitative ...
  • Determining Unique Fingerprint Features for Biometric Encoding of Data 

    Cucu, Catalin; Cucos, Alex; Corcoran, Peter (2008)
    A novel approach to determining unique fingerprint features with high repeatibility is described. The techniques described are particularly suitable for CE applications and devices employing inexpensive capacitative ...
  • Developing a scorecard for enterprise knowledge management 

    Cormican, Kathryn (2002-05-19)
    Enterprise knowledge management is becoming a critical component of competitive success. Managers must ensure that they can successfully generate, leverage and reuse knowledge assets in their organisations. In this view, ...
  • Developing a self assessment audit to support product innovation management 

    Cormican, Kathryn; O'Sullivan, David (2000)
    Product innovation is critical to the success of most design and manufacturing enterprises. It is widely recognised that effective co ordination, organisation and management affects product innovation success rates. Self ...
  • Development of a nested coastal circulation model: boundary error reduction 

    Nash, Stephen; Hartnett, Michael (Elsevier, 2014-03)
    Numerical models have a valuable role to play in the sustainable management of coastal waters but accurate simulation of land/sea interactions, particularly in areas of complex coastlines, requires the use of high spatial ...
  • Development of a structured on-the-job training model 

    Cormican, Kathryn; Masterson, Fiona (2007)
    This paper examines the potential of using knowledge management in developing a structured on-the-job training programme. Using a qualitative multiple case study approach, multiple sources of evidence were collected from ...
  • The development of a supplier performance evaluation tool 

    Cormican, Kathryn; Cunningham, Michael (2005)
    As product life cycles continue to shrink and global competition increases, manufacturers are outsourcing what they consider to be non-strategic activities in order to focus on their core competencies. Consequently these ...