Show simple item record

dc.contributor.authorLeen, Sean B.
dc.date.accessioned2015-12-17T11:18:44Z
dc.date.available2015-12-17T11:18:44Z
dc.date.issued2013-05-09
dc.identifier.citationCruzado, A., Leen, S. B., Urchegui, M. A., & Gómez, X. (2013). Finite element simulation of fretting wear and fatigue in thin steel wires. International Journal of Fatigue, 55, 7-21.en_IE
dc.identifier.issn0142-1123
dc.identifier.urihttp://hdl.handle.net/10379/5411
dc.descriptionJournal articleen_IE
dc.description.abstractThis paper studies the effect of fretting on fatigue life reduction of thin steel wires, using the frictionally-induced multiaxial contact stresses obtained from a finite element wear model, validated in previous work. The fatigue life prediction model uses a critical-plane SWT approach in a 3D crossed cylinder problem. A new damage accumulation methodology for the adaptive mesh simulation, based on the cyclic material removal, has been developed. Four methods (Manson’s universal slope, Muralidharan modified universal slopes, medians and fatigue S–N curves) for estimation of the fatigue coefficients of the wire have been used. Manson’s method and medians method give lives closer to those obtained from fretting wear tests in thin steel wires. The other methods are more conservative. The methodology predicts correctly the life reduction of this component due to the increase of normal load (contact pressure), while it is not clearly predicted that an increase of the stroke reduces the life of these components as shown in the experimental testing. Guidelines for developing a more robust methodology are proposed.en_IE
dc.description.sponsorshipUniversidad Empresa - SIVICA Project (Ref. UE2009-5)en_IE
dc.formatapplication/pdfen_IE
dc.language.isoenen_IE
dc.publisherElsevier ScienceDirecten_IE
dc.relation.ispartofInternational Journal Of Fatigueen
dc.subjectFretting wearen_IE
dc.subjectWire ropesen_IE
dc.subjectCrack nucleationen_IE
dc.subjectFinite elementsen_IE
dc.subjectWear simulationen_IE
dc.titleFinite element simulation of fretting wear and fatigue in thin steel wiresen_IE
dc.typeArticleen_IE
dc.date.updated2015-12-07T12:38:05Z
dc.identifier.doi10.1016/j.ijfatigue.2013.04.025
dc.local.publishedsourcehttp://dx.doi.org/10.1016/j.ijfatigue.2013.04.025en_IE
dc.description.peer-reviewedpeer-reviewed
dc.contributor.funder|~|
dc.internal.rssid10125584
dc.local.contactSean Leen, Mechanical & Biomedical Eng, Eng-2051, New Engineering Building, Nui Galway. 5955 Email: sean.leen@nuigalway.ie
dc.local.copyrightcheckedYes
dc.local.versionPUBLISHED
nui.item.downloads892


Files in this item

Attribution-NonCommercial-NoDerivs 3.0 Ireland
This item is available under the Attribution-NonCommercial-NoDerivs 3.0 Ireland. No item may be reproduced for commercial purposes. Please refer to the publisher's URL where this is made available, or to notes contained in the item itself. Other terms may apply.

The following license files are associated with this item:

Thumbnail

This item appears in the following Collection(s)

Show simple item record