Show simple item record

dc.contributor.authorGoggins, Jamie
dc.contributor.authorBroderick, Brian Michael
dc.contributor.authorLucas, AS
dc.date.accessioned2013-09-28T11:34:34Z
dc.date.available2013-09-28T11:34:34Z
dc.date.issued2006
dc.identifier.citationGoggins, J; Broderick, BM; Elghazouli, AY; Lucas, AS (2006) 'Behaviour of tubular steel members under cyclic axial loading'. Journal Of Constructional Steel Research, 62 (01-Feb):121-131.en_US
dc.identifier.urihttp://hdl.handle.net/10379/3687
dc.description.abstractThis paper examines the cyclic performance of axially-loaded tubular members used as bracing elements to provide lateral seismic resistance in steel framed structures. An experimental study into the response of members with square and rectangular hollow sections, made from cold-formed steel, is described. Three cross-sectional geometries were employed to represent a range of local and overall slenderness. Fifteen specimens, with normalised slendernesses between 0.4 and 3.2, were tested under cyclic axial displacements of increasing amplitude. In addition, twenty-one short specimens were tested under displacement-controlled monotonic tension loading, focusing primarily on the relationship between the tensile resistance of the material and that of the cross-section. Based on the results obtained in both sets of tests, and with due consideration of existing design provisions, the paper assesses the influence of section and member properties on the structural parameters that are most important for seismic design. These include the tensile capacity, initial and post-buckling compressive resistance, ductility capacity, energy dissipation, and mid-length lateral deformations of bracing members.en_US
dc.formatapplication/pdfen_US
dc.language.isoenen_US
dc.relation.ispartofJournal Of Constructional Steel Researchen
dc.subjectearthquake engineeringen_US
dc.subjectsteelen_US
dc.subjectcold-formed steelen_US
dc.subjectbracingen_US
dc.subjectstructural engineeringen_US
dc.subjectlow-cycle fatigueen_US
dc.subjectcompositeen_US
dc.subjectexperimental testingen_US
dc.titleBehaviour of tubular steel members under cyclic axial loadingen_US
dc.typeArticleen_US
dc.date.updated2013-09-26T12:08:07Z
dc.description.peer-reviewedpeer-reviewed
dc.contributor.funder|~|EU|~|
dc.internal.rssid1147859
dc.local.contactJamie Goggins, Civil Engineering Department, Nui Galway. 2609 Email: jamie.goggins@nuigalway.ie
dc.local.copyrightcheckedYes
dc.local.versionACCEPTED
nui.item.downloads896


Files in this item

Attribution-NonCommercial-NoDerivs 3.0 Ireland
This item is available under the Attribution-NonCommercial-NoDerivs 3.0 Ireland. No item may be reproduced for commercial purposes. Please refer to the publisher's URL where this is made available, or to notes contained in the item itself. Other terms may apply.

The following license files are associated with this item:

Thumbnail

This item appears in the following Collection(s)

Show simple item record