Show simple item record

dc.contributor.authorO’Neill, Caoimhe
dc.contributor.authorMcPolin, Daniel
dc.contributor.authorTaylor, Su
dc.contributor.authorHarte, Annette M.
dc.date.accessioned2019-03-21T15:33:56Z
dc.date.available2019-03-21T15:33:56Z
dc.date.issued2016-08-22
dc.identifier.citationO’Neill, Caoimhe, McPolin, Daniel , Taylor, Su , & Harte, Annette M. . (2016). Glued-in basalt FRP rods as moment connections in box section frame corners. Paper presented at the World Conference on Timber Engineering WCTE2016, Vienna, Austria, 22-25 August.en_IE
dc.identifier.isbn978-3-903024-35-9
dc.identifier.urihttp://hdl.handle.net/10379/15040
dc.description.abstractThis paper presents an experimental programme that investigates the application of glued-in rods as moment connections in a post and beam connection. Nine such frame corners were constructed of box sections using a combination of sawn timber sections with orientated strand board and sawn sections with birch plywood. 12mm diameter basalt fibre reinforced polymer rods were used with a constant embedded length of 23·dr (280mm) and glueline thickness of 0.125·dr (2mm). Specimens with 2 no. and 3 no. rods were tested. Testing is ongoing at the time of writing this abstract therefore final conclusions cannot be drawn. However, early results show that the connection method is providing full moment transfer between the beam and post. In the OSB box sections failure was governed by the strength of the OSB beams, with the glued-in rods remaining fully intact.en_IE
dc.description.sponsorshipThis research is funded by the Department of Agriculture, Food and the Marine of the Republic of Ireland under the FIRM/RSF/COFORD scheme as part of ‘Innovation in Irish timber Usage’ (project ref. 11/C/207).en_IE
dc.formatapplication/pdfen_IE
dc.language.isoenen_IE
dc.publisherTU Verlag Wienen_IE
dc.relation.ispartofWorld Conference on Timber Engineering WCTE2016en
dc.rightsAttribution-NonCommercial-NoDerivs 3.0 Ireland
dc.rights.urihttps://creativecommons.org/licenses/by-nc-nd/3.0/ie/
dc.subjectglued-in rodsen_IE
dc.subjectFRPen_IE
dc.subjectApplication of Glued-in Rodsen_IE
dc.subjectBasalt FRPen_IE
dc.subjectBox sectionsen_IE
dc.subjectFrame cornersen_IE
dc.subjectMultiple Rodsen_IE
dc.titleGlued-in basalt FRP rods as moment connections in box section framesen_IE
dc.typeConference Paperen_IE
dc.date.updated2019-03-19T21:03:05Z
dc.local.publishedsourcehttp://repositum.tuwien.ac.at/obvutwoa/content/titleinfo/1528439en_IE
dc.description.peer-reviewednon-peer-reviewed
dc.contributor.funderDepartment of Agriculture, Food and the Marineen_IE
dc.internal.rssid11876744
dc.local.contactAnnette M. Harte, Dept. Of Civil Engineering, Civil Engineering Building, Nui Galway. 2732 Email: annette.harte@nuigalway.ie
dc.local.copyrightcheckedYes
dc.local.versionPUBLISHED
nui.item.downloads72


Files in this item

Thumbnail
Thumbnail

This item appears in the following Collection(s)

Show simple item record

Attribution-NonCommercial-NoDerivs 3.0 Ireland
Except where otherwise noted, this item's license is described as Attribution-NonCommercial-NoDerivs 3.0 Ireland