Shear strength and durability testing of adhesive bonds in cross-laminated timber
Sikora, Karol S.
McPolin, Daniel O.
Harte, Annette M.
MetadataShow full item record
This item's downloads: 0 (view details)
Sikora, Karol S. McPolin, Daniel O.; Harte, Annette M. (2015). Shear strength and durability testing of adhesive bonds in cross-laminated timber. The Journal of Adhesion 92 (7), 758-777
This paper addresses the quality of the interface-and edge-bonded joints in layers of cross-laminated timber (CLT) panels. The shear performance was studied to assess the suitability of two different adhesives, polyurethane (PUR) and phenol-resorcinol-formaldehyde (PRF), and to determine the optimum clamping pressure. Since there is no established testing procedure to determine the shear strength of the surface bonds between layers in a CLT panel, block shear tests of specimens in two different configurations were carried out, and further shear tests of edge-bonded specimen in two configurations were performed. Delamination tests were performed on samples which were subjected to accelerated aging to assess the durability of bonds in severe environmental conditions. Both tested adhesives produced boards with shear strength values within the edge-bonding requirements of prEN 16351 for all manufacturing pressures. While the PUR specimens had higher shear strength values, the PRF specimens demonstrated superior durability characteristics in the delamination tests. It seems that the test protocol introduced in this study for crosslam-bonded specimens, cut from a CLT panel, and placed in the shearing tool horizontally, accurately reflects the shearing strength of glue lines in CLT.