Search
Now showing items 21-30 of 31
Probing the antagonistic effect of toluene as a component in surrogate fuel models at low temperatures and high pressures. A case study of toluene/dimethyl ether mixtures
(Elsevier, 2016-07-12)
There is a dearth of experimental data which examine the fundamental low-temperature ignition (T < 900 K) behavior of toluene resulting in a lack of data for the construction, validation, and interpretation of chemical ...
Ignition characteristics of 2-methyltetrahydrofuran: An experimental and kinetic study
(Elsevier, 2016-10-10)
The present paper elucidates oxidation behavior of 2-methyltetrahydrofuran (2-MTHF), a novel second-generation biofuel. New experimental data sets for 2-MTHF including ignition delay time measurements in two different ...
An extensive experimental and modeling study of 1-butene oxidation
(Elsevier, 2017-04-13)
In this study, a series of ignition delay time (IDT) experiments of 1-butene were performed in a high-pressure shock tube (HPST) and in a rapid compression machine (RCM) under conditions of relevance to practical combustors. ...
The oxidation of 2-butene: A high pressure ignition delay, kinetic modeling study and reactivity comparison with isobutene and 1-butene
(Elsevier, 2016-06-16)
Butenes are intermediates ubiquitously formed by decomposition and oxidation of larger hydrocarbons (e.g. alkanes) or alcohols present in conventional or reformulated fuels. In this study, a series of novel igni-tion delay ...
An experimental and modeling study of surrogate mixtures of n-propyl- and n-butylbenzene in n-heptane to simulate n-decylbenzene ignition
(Elsevier ScienceDirect, 2014-01-11)
This paper presents experimental data for the oxidation of two surrogates for the large alkylbenzene class of compounds contained in diesel fuels, namely n-decylbenzene. A 57:43 molar% mixture of n-propylbenzene:n-heptane ...
An experimental and chemical kinetic modeling study of 1,3-butadiene combustion: Ignition delay time and laminar flame speed measurements
(Elsevier, 2018-09-10)
Ignition delay times for 1,3-butadiene oxidation were measured in five different shock tubes and in a rapid compression machine (RCM) at thermodynamic conditions relevant to practical combustors. The ignition delay times ...
Autoignition characteristics of oxygenated gasolines
(Elsevier, 2017-08-14)
Gasoline anti-knock quality, defined by the research and motor octane numbers (RON and MON), is important for increasing spark ignition (SI) engine efficiency. Gasoline knock resistance can be increased using a number of ...
An experimental and modeling study of the ignition of dimethyl carbonate in shock tubes and rapid compression machine
(Elsevier, 2017-11-05)
Ignition delay times of dimethyl carbonate DMC were measured using low- and high-pressure shock tubes and in a rapid compression machine (RCM). In this way, the effect of fuel concentration (0.75% and 1.75%), pressure (2.0, ...
A comprehensive experimental and modeling study of the ignition delay time characteristics of ternary and quaternary blends of methane, ethane, ethylene, and propane over a wide range of temperature, pressure, equivalence ratio, and dilution
(Elsevier, 2021-08-09)
The ignition delay time (IDT) characteristics of new ternary and quaternary blended C 1 ¿C 3 gaseous hy- drocarbons, including methane/ethane/ethylene and methane/ethane/ethylene/propane, are studied over a wide range of ...
Ignition delay time measurements of diesel and gasoline blends
(Elsevier, 2020-09-23)
Blends of diesel and gasoline can be used to achieve certain desired ignition characteristics in advanced compression ignition engine concepts. In this work, ignition delay times were measured for two blends of diesel and ...