Now showing items 1-5 of 5
An experimental and kinetic modeling study of n-hexane oxidation
Ignition delay times for n-hexane oxidation have been measured in a rapid compression machine (RCM) at stoichiometric conditions and at 15 bar. Due to the high reactivity of n-hexane and non-ideal experimental effects ...
A detailed chemical kinetic modeling, ignition delay time and jet-stirred reactor study of methanol oxidation
A shock tube (ST) and a rapid compression machine (RCM) have been used to measure new ignition delay times for methanol oxidation over a wide range of pressures (2-50 atm) and equivalence ratios (0.5, 1.0, and 2.0). These ...
An experimental and modeling study of shock tube and rapid compression machine ignition of n-butylbenzene/air mixtures
In our previous work (D. Darcy, C.J. Tobin, K. Yasunaga, J.M. Simmie, J. Wurmel, W.K. Metcalfe, T. Niass, S.S. Ahmed, C.K. Westbrook, H.J. Curran, Combust. Flame 159 (2012) 2219-2232), ignition delay times of n-butylbenzene ...
Towards a kinetic understanding of the NOx promoting-effect on ignition of coalbed methane: A case study of methane/nitrogen dioxide mixtures
Nitrogen dioxide (NO2) is an important impurity in coal-bed methane (CBM) and a dominant component of NOx pollution in practical engines. Its promoting effect on methane ignition has been studied in the current experimental ...
Autoignition of ethanol in a rapid compression machine
Ethanol is a renewable source of energy and significant attention has been directed to the development of a validated chemical kinetic mechanism for this fuel. The experimental data for the autoignition of ethanol in the ...