Now showing items 1-4 of 4
An extensive experimental and modeling study of 1-butene oxidation
In this study, a series of ignition delay time (IDT) experiments of 1-butene were performed in a high-pressure shock tube (HPST) and in a rapid compression machine (RCM) under conditions of relevance to practical combustors. ...
Cyclopentane combustion. Part II. Ignition delay measurements and mechanism validation
This study reports cyclopentane ignition delay measurements over a wide range of conditions. The measurements were obtained using two shock tubes and a rapid compression machine, and were used to test a detailed low- and ...
Autoignition characteristics of oxygenated gasolines
Gasoline anti-knock quality, defined by the research and motor octane numbers (RON and MON), is important for increasing spark ignition (SI) engine efficiency. Gasoline knock resistance can be increased using a number of ...
An experimental and modeling study of the ignition of dimethyl carbonate in shock tubes and rapid compression machine
Ignition delay times of dimethyl carbonate DMC were measured using low- and high-pressure shock tubes and in a rapid compression machine (RCM). In this way, the effect of fuel concentration (0.75% and 1.75%), pressure (2.0, ...