Now showing items 1-9 of 9

    • A comparative study of the effect of varied reaction environments on a swirl stabilized flame geometry via optical measurements 

      Banyon, Colin; Rodriguez-Henriquez, Jose J.; Paterakis, George; Malliotakis, Zisis; Souflas, Konstantinos; Keramiotis, Christos; Vourliotakis, George; Mauss, Fabian; Curran, Henry J.; Skevis, George; Koutmos, Panagiotis; Founti, Maria (Elsevier, 2018-01-04)
      The present work is a part of a larger experimental campaign which examines the behaviour of various fuels on a swirl stabilized flame burner configuration. Overall, detailed speciation measurements and temperature ...
    • A comprehensive iso-octane combustion model with improved thermochemistry and chemical kinetics 

      Atef, Nour; Kukkadapu, Goutham; Mohamed, Samah Y.; Al Rashidi, Mariam J.; Al Rashidi, Mariam; Banyon, Colin; Mehl, Marco; Heufer, Karl Alexander; Nasir, Ehson F.; Alfazazi, A.; Das, Apurba K.; Westbrook, Charles K.; Pitz, William J.; Lu, Tianfeng; Farooq, Aamir; Sung, Chih-Jen; Curran, Henry J.; Sarathy, S. Mani (Elsevier, 2017-02-05)
      Iso-Octane (2,2,4-trimethylpentane) is a primary reference fuel and an important component of gasoline fuels. Moreover, it is a key component used in surrogates to study the ignition and burning characteristics of gasoline ...
    • Cyclopentane combustion. Part II. Ignition delay measurements and mechanism validation 

      Al Rashidi, Mariam J.; Mármol, Juan C.; Banyon, Colin; Sajid, Muhammad B.; Mehl, Marco; Pitz, William J.; Mohamed, Samah; Alfazazi, Adamu; Lu, Tianfeng; Curran, Henry J.; Farooq, Aamir; Sarathy, S. Mani (Elsevier, 2017-06-12)
      This study reports cyclopentane ignition delay measurements over a wide range of conditions. The measurements were obtained using two shock tubes and a rapid compression machine, and were used to test a detailed low- and ...
    • An experimental and chemical kinetic modeling study of 1,3-butadiene combustion: Ignition delay time and laminar flame speed measurements 

      Zhou, Chong-Wen; Li, Yang; Burke, Ultan; Banyon, Colin; Somers, Kieran P.; Ding, Shuiting; Khan, Saadat; Hargis, Joshua W.; Sikes, Travis; Mathieu, Olivier; Petersen, Eric L.; AlAbbad, Mohammed; Farooq, Aamir; Pan, Youshun; Zhang, Yingjia; Huang, Zuohua; Lopez, Joseph; Loparo, Zachary; Vasu, Subith S.; Curran, Henry J. (Elsevier, 2018-09-10)
      Ignition delay times for 1,3-butadiene oxidation were measured in five different shock tubes and in a rapid compression machine (RCM) at thermodynamic conditions relevant to practical combustors. The ignition delay times ...
    • An experimental and kinetic modeling study of n-hexane oxidation 

      Zhang, Kuiwen; Banyon, Colin; Togbé, Casimir; Dagaut, Philippe; Bugler, John; Curran, Henry J. (Elsevier, 2015-09-11)
      Ignition delay times for n-hexane oxidation have been measured in a rapid compression machine (RCM) at stoichiometric conditions and at 15 bar. Due to the high reactivity of n-hexane and non-ideal experimental effects ...
    • An experimental and kinetic modeling study of the oxidation of hexane isomers: Developing consistent reaction rate rules for alkanes 

      Kuiwen, Zhang; Banyon, Colin; Burke, Ultan; Kukkadapu, Goutham; Wagnon, Scott W.; Mehl, Marco; Curran, Henry J.; Westbrook, Charles K.; Pitz, William J. (Elsevier, 2019-05-09)
      Alkanes are key components in gasoline, jet and diesel fuels and considerably influence the combustion behavior of these fuels because of their wide range of reactivity. An improved understanding of their combustion behavior ...
    • Modeling ignition of a heptane isomer: improved thermodynamics, reaction pathways, kinetics, and rate rule optimizations for 2-methylhexane 

      Mohamed, Samah Y.; Cai, Liming; Khaled, Fethi; Banyon, Colin; Wang, Zhandong; Al Rashidi, Mariam J.; Pitsch, Heinz; Curran, Henry J.; Farooq, Aamir; Sarathy, S. Mani (American Chemical Society, 2016-03-21)
      Accurate chemical kinetic combustion models of lightly branched alkanes (e.g., 2-methylalkanes) are important to investigate the combustion behavior of real fuels. Improving the fidelity of existing kinetic models is a ...
    • Testing the validity of a mechanism describing the oxidation of binary n-heptane/toluene mixtures at engine operating conditions 

      Malliotakis, Zisis; Banyon, Colin; Kuiwen, Zhang; Wagnon, Scott; Rodriguez Henriquez, Jose Juan; Vourliotakis, George; Keramiotis, Christos; Founti, Maria; Mauss, Fabian; Pitz, William J.; Curran, Henry J. (Elsevier, 2019-11-02)
      The aim of this work is to evaluate the influence of the n-heptane/toluene ratio on the reactivity of binary toluene reference fuels (TRFs), through a combined experimental and numerical work. Novel experimental ignition ...
    • An updated experimental and kinetic modeling study of n-heptane oxidation 

      Zhang, Kuiwen; Banyon, Colin; Bugler, John; Curran, Henry J.; Rodriguez, Anne; Herbinet, Olivier; Battin-Leclerc, Frédérique; B'Chir, Christine; Heufer, Karl Alexander (Elsevier ScienceDirect, 2016-07-25)
      This work presents an updated experimental and kinetic modeling study of n-heptane oxidation. In the experiments, ignition delay times of stoichiometric n-heptaneiair mixtures have been measured in two different high-pressure ...