Browsing School of Chemistry (Scholarly Articles) by Title
Now showing items 106-125 of 317
-
An experimental and chemical kinetic modeling study of 1,3-butadiene combustion: Ignition delay time and laminar flame speed measurements
(Elsevier, 2018-09-10)Ignition delay times for 1,3-butadiene oxidation were measured in five different shock tubes and in a rapid compression machine (RCM) at thermodynamic conditions relevant to practical combustors. The ignition delay times ... -
Experimental and computational examination of anastellin (FnIII1c)-polymer interactions
(Wiley, 2016-10-24)Using a combination of experimental and computational approaches, the interaction between anastellin, a recombinant fragment of fibronectin, and representative biomaterial surfaces has been examined. Anastellin and ... -
Experimental and kinetic modeling study of 2-methyl-2-butene: allylic hydrocarbon kinetics
(American Chemical Society, 2015-03-20)Two experimental studies have been carried out on the oxidation of 2-methyl-2-butene, one measuring ignition delay times behind reflected shock waves in a stainless steel shock tube, and the other measuring fuel, intermediate, ... -
An experimental and kinetic modeling study of cyclopentane and dimethyl ether blends
(Elsevier, 2020-11-13)Cyclopentane is a suitable naphthene, or cycloalkane, in a palette for multi-component gasoline surro- gate fuels due to its presence in market fuels and its relevance to alkyl substituted cyclopentanes also present. ... -
An experimental and kinetic modeling study of n-hexane oxidation
(Elsevier, 2015-09-11)Ignition delay times for n-hexane oxidation have been measured in a rapid compression machine (RCM) at stoichiometric conditions and at 15 bar. Due to the high reactivity of n-hexane and non-ideal experimental effects ... -
An experimental and kinetic modeling study of the oxidation of hexane isomers: Developing consistent reaction rate rules for alkanes
(Elsevier, 2019-05-09)Alkanes are key components in gasoline, jet and diesel fuels and considerably influence the combustion behavior of these fuels because of their wide range of reactivity. An improved understanding of their combustion behavior ... -
An experimental and kinetic modeling study of the pyrolysis and oxidation of n-C-3-C-5 aldehydes in shock tubes
(Elsevier ScienceDirect, 2015-08-24)Due to the increasing interest in the use of biofuels for energy production, it is of great importance to better understand the combustion and thermal decomposition characteristics of species such as aldehydes. These are ... -
Experimental and kinetic modeling study of the shock tube ignition of a large oxygenated fuel: tri-propylene glycol mono-methyl ether
(Elsevier, 2015-05-13)Tri-propylene glycol monomethyl ether (TPGME) is an important oxygenated fuel additive that can be used to reduce soot in diesel engines. However, a validated chemical kinetic model that incorporates the low- to high-temperature ... -
An experimental and modeling study of diethyl carbonate oxidation
(Elsevier ScienceDirect, 2015-01-19)Diethyl carbonate (DEC) is an attractive biofuel that can be used to displace petroleum-derived diesel fuel, thereby reducing CO2 and particulate emissions from diesel engines. A better understanding of DEC combustion ... -
An experimental and modeling study of nitromethane + O2 + N2 ignition in a shock tube
(Elsevier, 2016-09-09)The ignition of nitromethane/O-2/N-2 mixtures was investigated via shock tube experiments in the temperature range 947-1333 K at reflected shock pressures near 8, 16 and 32 atm. The ignition was recorded as the intensity ... -
An experimental and modeling study of propene oxidation. Part 1: Speciation measurements in jet-stirred and flow reactors
(Elsevier ScienceDirect, 2014-06-20)Propene is a significant component of Liquefied Petroleum Gas (LPG) and an intermediate in the combustion of higher order hydrocarbons. To better understand the combustion characteristics of propene, this study and its ... -
An experimental and modeling study of propene oxidation. Part 2: Ignition delay time and flame speed measurements
(Elsevier ScienceDirect, 2014-09-11)Experimental data obtained in this study (Part II) complement the speciation data presented in Part I, but also offer a basis for extensive facility cross-comparisons for both experimental ignition delay time (IDT) and ... -
An experimental and modeling study of shock tube and rapid compression machine ignition of n-butylbenzene/air mixtures
(Elsevier, 2013-08-28)In our previous work (D. Darcy, C.J. Tobin, K. Yasunaga, J.M. Simmie, J. Wurmel, W.K. Metcalfe, T. Niass, S.S. Ahmed, C.K. Westbrook, H.J. Curran, Combust. Flame 159 (2012) 2219-2232), ignition delay times of n-butylbenzene ... -
An experimental and modeling study of surrogate mixtures of n-propyl- and n-butylbenzene in n-heptane to simulate n-decylbenzene ignition
(Elsevier ScienceDirect, 2014-01-11)This paper presents experimental data for the oxidation of two surrogates for the large alkylbenzene class of compounds contained in diesel fuels, namely n-decylbenzene. A 57:43 molar% mixture of n-propylbenzene:n-heptane ... -
An experimental and modeling study of the ignition of dimethyl carbonate in shock tubes and rapid compression machine
(Elsevier, 2017-11-05)Ignition delay times of dimethyl carbonate DMC were measured using low- and high-pressure shock tubes and in a rapid compression machine (RCM). In this way, the effect of fuel concentration (0.75% and 1.75%), pressure (2.0, ... -
An experimental and modeling study of the shock tube ignition of a mixture of n-heptane and n-propylbenzene as a surrogate for a large alkyl benzene
(Elsevier ScienceDirect, 2012-07-11)Alkyl aromatics are an important chemical class in gasoline, jet and diesel fuels. In the present work, an n-propylbenzene and n-heptane mixture is studied as a possible surrogate for large alkyl benzenes contained in ... -
An experimental and modelling study of n-pentane oxidation in two jet-stirred reactors: The importance of pressure-dependent kinetics and new reaction pathways
(Elsevier, 2016-06-16)Two jet-stirred reactors (JSRs) coupled to gas chromatographic and spectroscopic techniques have been utilised to detect chemical species evolved during n -pentane oxidation at 1 and 10 atm, in the temperature range 500-1100 ... -
An experimental, theoretical, and modeling study of the ignition behavior of cyclopentanone
(Elsevier, 2018-07-05)The ignition delay times of cyclopentanone in air were measured using a high pressure shock tube (HPST) and a rapid compression machine (RCM) over the temperature range of 794-1368 K at P = 15 and 30 bar and at equivalence ... -
Extended wavelength anisotropy resolved multidimensional emission spectroscopy (ARMES) measurements: better filters, validation standards, and Rayleigh scatter removal methods
(IOP Publishing, 2017-08-17)Anisotropy resolved multidimensional emission spectroscopy (ARMES) provides valuable insights into multi-fluorophore proteins (Groza et al 2015 Anal. Chim. Acta 886 133-42). Fluorescence anisotropy adds to the multidimensional ... -
An extensive experimental and modeling study of 1-butene oxidation
(Elsevier, 2017-04-13)In this study, a series of ignition delay time (IDT) experiments of 1-butene were performed in a high-pressure shock tube (HPST) and in a rapid compression machine (RCM) under conditions of relevance to practical combustors. ...