Browsing Mechanical Engineering (Scholarly Articles) by Title
Now showing items 40-59 of 176
-
A dislocation-based yield strength determination model in nano-indentation test
(SAGE Publications, 2021-02-20)This paper presents a dislocation-based yield strength model for the nano-indentation size effect. The model is based on functional expressions involving the densities of statistically stored dislocations and geometrically ... -
Dissolution of delta phase in Ni-based superalloy during linear friction welding: integrated multiphysics computational process modelling
(Springer, 2021-06-15)Linear friction welding (LFW) is an increasingly popular solid-state joining method for challenging applications such as integrated blade disk of aero-engines. However, the influence of friction-generated heat on the ... -
Dual-phase cohesive zone modelling and experimental validation for hydrogen-assisted cracking of 2205 duplex stainless steel
(Elsevier, 2021-01-01)The hydrogen-assisted cracking (HAC) behavior of 2205 duplex stainless steel is investigated via experimental testing and computational modelling, with specific focus on developing a predictive methodology for the coupled ... -
Effect of eddy length scale on mechanical loading of blood cells in turbulent flow
(2009)Non-physiological turbulent blood flow is known to occur in and near implanted cardiovascular devices, but its effects on blood are poorly understood. The objective of this work is to investigate the effect of turbulent ... -
Effect of fast pyrolysis conditions on biomass solid residues at high temperatures
(Elsevier, 2015-12-03)Fast pyrolysis of wood and straw was conducted in a drop tube furnace (DTF) and compared with corresponding data from a wire mesh reactor (WMR) to study the influence of temperature (1000–1400)°C, biomass origin (pinewood, ... -
The effect of feedstock origin and temperature on the structure and reactivity of char from pyrolysis at 1300 2800 °C
(Elsevier, 2018-07-31)This study reports the effect of feedstock origin, residence time, and heat treatment temperature on CO2 and O2 reactivities, nanostructure and carbon chemistry of chars prepared at 1300, 1600, 2400, and 2800 °C in a slow ... -
The effect of ferrite phases on the micromechanical response and crack initiation in the intercritical heat-affected zone of a welded 9Cr martensitic steel
(Wiley, 2018-02-08)This paper presents a crystal plasticity model to predict the tensile response and crack initiation in a mixed ferrite-martensite material with a low volume fraction of pro-eutectoid ferrite, representative of a welding-induced ... -
Effect of high-temperature corrosion on the service life of P91 piping in biomass co-firing
(American Society of Mechanical Engineers (ASME), 2016-02-24)Co-firing biomass with traditional fuels is becoming increasingly relevant to thermal power plant operators due to increasingly stringent regulations on greenhouse gas emissions. It has been found that when biomass is ... -
The effect of inclusions on the high‐temperature low‐cycle fatigue performance of cast MarBN: Experimental characterisation and computational modelling
(Wiley, 2018-06-15)The presence of inclusions is a known source of crack initiation and component failure in cast materials. In this work, the role of inclusions is investigated via a combined program of high-temperature low-cycle fatigue ... -
Effect of microwave and thermal co-pyrolysis of low-rank coal and pine wood on product distributions and char structure
(American Chemical Society, 2019-07-07)Direct conversion of a low-rank coal into valuable chemicals or improving its char’s coking value became very demanding goals in coal utilization strategies. In this work, the co-pyrolysis of a low-rank lignite coal and ... -
Effect of pre-corrosion on damage evolution and crack propagation in aluminum alloy 7050-T7651
(Wiley, 2018-05-16)This paper investigates the effects of pre-corrosion on the tensile behavior of aluminum alloy 7050-T7651. A combined experimental approach involving digital image correlation, scanning electron microscopy, and tensile ... -
The effect of slip regime on fretting wear-induced stress evolution
(Elsevier, 2004-02-20)A numerical approach to simulate fretting wear, based on a modified version of the Archard equation, is applied to a cylinder-on-flat fretting configuration for gross sliding and partial slip conditions. The evolution of ... -
The effect of the beta phase on the micromechanical response of dual-phase titanium alloys
(Elsevier, 2017-03-24)This paper investigates the role of beta phase on the micro-mechanical behaviour of dual-phase titanium alloys, with particular emphasis on the phenomenon of cold dwell fatigue, which occurs in such alloys under room ... -
Effect of welding on microstructure and mechanical response of X100Q bainitic steel through nanoindentation, tensile, cyclic plasticity and fatigue characterisation
(Elsevier, 2020-12-30)This paper presents an experimental characterisation of fatigue at welded connections for the next-generation high-strength low-alloy offshore riser steel, X100Q. An instrumented girth weld is conducted with a parallel ... -
Effects of several types of biomass fuels on the yield, nanostructure and reactivity of soot from fast pyrolysis at high temperatures
(Elsevier, 2016-03-24)This study presents the effect of biomass origin on the yield, nanostructure and reactivity of soot. Soot was produced from wood and herbaceous biomass pyrolysis at high heating rates and at temperatures of 1250 and 1400 ... -
Efficiency and accuracy of GPU-parallelized Fourier spectral methods for solving phase-field models
(Elsevier, 2023-06-15)Phase-field models are widely employed to simulate microstructure evolution during processes such as solidification or heat treatment. The resulting partial differential equations, often strongly coupled together, may be ... -
An efficient computational framework for hydrofoil characterisation and tidal turbine design
(Elsevier, 2018-11-13)Blade element momentum (BEM) modelling offers a computationally inexpensive means of analysing turbine performance. Lift and drag coefficient data-sets specific to the operating conditions of the turbine must be input into ... -
Evaluation and analysis of fracture modes in single composite basalt/epoxy fibres by photoelastic method and single fibre fragmentation test
(Springer, 2022-04-11)In this work, the suitability of basalt fibres for uni-directional composite material applications, and adhesion between the fibres and the matrix they are embedded in have been investigated. A single fibre fragmentation ... -
An evaluation into the limitations and emerging trends of Six Sigma: an empirical study
(Emerald, 2018)Purpose: The purpose of this paper is to evaluate the limitations and emerging trends of Six Sigma through an empirical study. Six Sigma is one of the most powerful business process improvement strategies used by numerous ... -
Experimental and computational characterization of the effect of manufacturing-induced defects on high temperature, low-cycle fatigue for MarBN
(Elsevier, 2020-05-22)Manufacturing-induced defects are a key source of crack initiation and component failure under high temperature cyclic loading. In this work, 3D X-ray micro-computed tomography and microstructural analysis of manufacturing-induced ...